Dell Force10 MXL Blade MXL 10/40GbE Switch IO Module FTOS Command Line Referen - Page 403

maximum-paths Enable the software to forward packets over multiple paths. Syntax maximum-paths number To disable packet forwarding over multiple paths, use the no maximum-paths command. Parameters number Specify the number of paths. Range: 1 to 64. Default: 4 paths. Defaults 4 Command Modes ROUTER OSPF Command History Version 8.3.16.1 Introduced on MXL 10/40GbE Switch IO Module mib-binding Enable this OSPF process ID to manage the SNMP traps and process SNMP queries. Syntax mib-binding To mib-binding on this OSPF process, use the no mib-binding command. Defaults none Command Modes ROUTER OSPF Command History Usage Information Version 8.3.16.1 Introduced on MXL 10/40GbE Switch IO Module This command is either enabled or disabled. If no OSPF process is identified as the MIB manager, the first OSPF process will be used. If an OSPF process has been selected, it must be disabled prior to assigning new process ID the MIB responsibility. network area Define which interfaces run OSPF and the OSPF area for those interfaces. Syntax network ip-address mask area area-id To disable an OSPF area, use the no network ip-address mask area area-id command. Parameters ip-address Specify a primary or secondary address in dotted decimal format. The primary address is required before adding the secondary address. Open Shortest Path First (OSPFv2) | 403