Dell Force10 MXL Blade MXL 10/40GbE Switch IO Module FTOS Command Line Referen - Page 553
ip tacacs source-interface, tacacs-server host
View all Dell Force10 MXL Blade manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 553 highlights
Command History Version 8.3.16.1 Introduced on MXL 10/40GbE Switch IO Module ip tacacs source-interface Specify an interface's IP address as the source IP address for TACACS+ connections. Syntax ip tacacs source-interface interface To delete a source interface, use the no ip tacacs source-interface command. Parameters interface Enter the following keywords and slot/port or number information: • For Loopback interfaces, enter the keyword loopback followed by a number from zero (0) to 16838. • For the Null interface, enter the keywords null 0. • For a Port Channel interface, enter the keyword port-channel followed by a number: Range: 1 to 128 • For a Ten Gigabit Ethernet interface, enter the keyword TenGigabitEthernet followed by the slot/port information. • For a 40-Gigabit Ethernet interface, enter the keyword fortyGigE followed by the slot/port information. • For VLAN interface, enter the keyword vlan followed by a number from 1 to 4094. Defaults Not configured. Command Mode CONFIGURATION Command History Version 8.3.16.1 Introduced on MXL 10/40GbE Switch IO Module tacacs-server host Specify a TACACS+ host. Syntax tacacs-server host {hostname | ipv4-address} [port number] [timeout seconds] [key key] Parameters hostname ipv4-address port number Enter the name of the TACACS+ server host. Enter the IPv4 address (A.B.C.D) of the TACACS+ server host. (OPTIONAL) Enter the keyword port followed by a number as the port to be used by the TACACS+ server. Range: zero (0) to 65535 Default: 49 Security | 553