Dell Force10 MXL Blade MXL 10/40GbE Switch IO Module FTOS Command Line Referen - Page 52

www.dell.com | support.dell.com line Enable and configure console and virtual terminal lines to the system. This command accesses LINE mode, where you can set the access conditions for the designated line. Syntax line {console 0 | vty number [end-number]} Parameters console 0 vty number end-number Enter the keyword console 0 to configure the console port. The console option is . Enter the keyword vty followed by a number from 0 to 9 to configure a virtual terminal line for Telnet sessions. The system supports 10 Telnet sessions. (OPTIONAL) Enter a number from 1 to 9 as the last virtual terminal line to configure. You can configure multiple lines at one time. Defaults Not configured Command Modes CONFIGURATION Command History Version 8.3.16.1 Introduced on MXL 10/40GbE Switch IO Module Usage You cannot delete a terminal connection. Information Related Commands access-class password show memory Restricts incoming connections to a particular IP address in an IP access control list (ACL). Specifies a password for users on terminal lines. View current memory usage on the MXL switch. motd-banner Enable a Message of the Day (MOTD) banner to appear when you log in to the system. Syntax motd-banner Defaults Enabled on all lines. Command Modes LINE Command History Version 8.3.16.1 Introduced on MXL 10/40GbE Switch IO Module ping Syntax Test connectivity between the system and another device by sending echo requests and waiting for replies. ping [host | ip-address] [count {number | continuous}] [datagram-size] [timeout] [source (ip src-ipv4-address) | interface] [tos] [df-bit (y|n)] [validate-reply(y|n)] [pattern pattern] [sweep-min-size] [sweep-max-size] [sweep-interval] [ointerface (ip src-ipv4-address) | interface] 52 | Control and Monitoring