Dell Force10 MXL Blade MXL 10/40GbE Switch IO Module FTOS Command Line Referen - Page 608
storm-control broadcast Interface, storm-control multicast Configuration
View all Dell Force10 MXL Blade manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 608 highlights
www.dell.com | support.dell.com Parameters packets_per_second Enter the packets per second of broadcast traffic allowed from the network. Range: 0 to 33554368. Defaults none Command Modes CONFIGURATION (conf) Command History Version 8.3.16.1 Introduced on MXL 10/40GbE Switch IO Module Usage Broadcast storm control is valid on Layer 2/Layer 3 interfaces only. Layer 2 broadcast traffic is treated Information as unknown-unicast traffic. storm-control broadcast (Interface) Configure the packets per second of broadcast traffic to be limited on the interface. Syntax storm-control broadcast [packets_per_second] in To disable broadcast storm control on the interface, use the no storm-control broadcast [packets_per_second] in command. Parameters packets_per_second Enter the packets per second of broadcast traffic allowed from the network. Range: 0 to 33554368 Defaults none Command Modes INTERFACE (conf-if-interface-slot/port) Command History Version 8.3.16.1 Introduced on MXL 10/40GbE Switch IO Module storm-control multicast (Configuration) Configure the packets per second (pps) of multicast traffic. Syntax storm-control multicast [packets_per_second] in To disable storm-control for multicast traffic into the network, use the no storm-control multicast [packets_per_second] in command. Parameters packets_per_second Enter the packets per second of multicast traffic allowed from the network followed by the keyword in. Range: 0 to 33554368 Defaults none Command Modes CONFIGURATION (conf) Command History Version 8.3.16.1 Introduced on MXL 10/40GbE Switch IO Module 608 | Storm Control