Dell Force10 MXL Blade MXL 10/40GbE Switch IO Module FTOS Command Line Referen - Page 479
service-queue
View all Dell Force10 MXL Blade manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 479 highlights
Usage A single policy-map can be attached to one or more interfaces to specify the service-policy for those Information interfaces. A policy map attached to an interface can be modified. Related Commands policy-map-output Creates an output policy map. service-queue Assign a class map and QoS policy to different queues. Syntax service-queue queue-id [class-map class-map-name] [qos-policy qos-policy-name] To remove the queue assignment, use the no service-queue queue-id [class-map class-map-name] [qos-policy qos-policy-name] command. Parameters queue-id class-map class-map-name qos-policy qos-policy-name Enter the value used to identify a queue. Range:0-3 (four queues per interface; four queues are reserved for control traffic.) (OPTIONAL) Enter the keyword class-map followed by the class map name assigned to the queue in character format (16 character maximum). Note: This option is available under policy-map-input only. (OPTIONAL) Enter the keyword qos-policy followed by the QoS policy name assigned to the queue in text format (16 characters maximum). This specifies the input QoS policy assigned to the queue under policy-map-input and output QoS policy under policy-map-output context. Defaults none Command Modes CONFIGURATION (conf-policy-map-in and conf-policy-map-out) Command History Usage Information Version 8.3.16.1 Introduced on MXL 10/40GbE Switch IO Module There are four (4) queues per interface on the MXL Switch. This command assigns a class map or QoS policy to different queues. Related Commands class-map service-policy input service-policy output Identifies the class map. Applies an input policy map to the selected interface. Applies an output policy map to the selected interface. Quality of Service (QoS) | 479