Dell Force10 MXL Blade MXL 10/40GbE Switch IO Module FTOS Command Line Referen - Page 587
snmp-server group Command Example, 1v2cwriteg
View all Dell Force10 MXL Blade manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 587 highlights
Parameters group_name 1 | 2c | 3 auth noauth priv read name write name notify name access-list-name Enter a text string (up to 20 characters long) as the name of the group. Defaults: The following groups are created for mapping to read/write community/security-names. • v1v2creadg - maps to a community/security-name with ro permissions • 1v2cwriteg - maps to a community/security-name rw permissions (OPTIONAL) Enter the security model version number (1, 2c, or 3). • 1 is the least secure version • 3 is the most secure of the security modes. • 2c allows transmission of informs and counter 64, which allows for integers twice the width of what is normally allowed. Default: 1 (OPTIONAL) Enter the keyword auth to specify authentication of a packet without encryption. (OPTIONAL) Enter the keyword noauth to specify no authentication of a packet. (OPTIONAL) Enter the keyword priv to specify both authentication and then scrambling of the packet. (OPTIONAL) Enter the keyword read followed by a name (a string of up to 20 characters long) as the read view name. Default: GlobalView is set by default and is assumed to be every object belonging to the Internet (1.3.6.1) OID space. (OPTIONAL) Enter the keyword write followed by a name (a string of up to 20 characters long) as the write view name. (OPTIONAL) Enter the keyword notify followed by a name (a string of up to 20 characters long) as the notify view name. (OPTIONAL) Enter the standard IPv4 access list name (a string up to 16 characters long). Defaults As defined above Command Modes CONFIGURATION Command History Usage Information Version 8.3.16.1 Introduced on MXL 10/40GbE Switch IO Module Figure 31-8 shows the group named harig as a version 3 user requiring both authentication and encryption and read access limited to the read named rview. Example Figure 31-8. snmp-server group Command Example FTOS#conf FTOS(conf)# snmp-server group harig 3 priv read rview FTOS# Note: The number of configurable groups is limited to 16 groups. Simple Network Management Protocol (SNMP) and Syslog | 587