Dell Force10 MXL Blade MXL 10/40GbE Switch IO Module FTOS Command Line Referen - Page 599
logging history, logging history size
View all Dell Force10 MXL Blade manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 599 highlights
Command History Related Commands Version 8.3.16.1 Introduced on MXL 10/40GbE Switch IO Module logging logging on Enables logging to a Syslog server. Enables logging. logging history Specify which messages are logged to the history table of the switch and the SNMP network management station (if configured). Syntax logging history level To return to the default values, use the no logging history command. Parameters level Indicate a value from 0 to 7 or enter one of the following equivalent words: emergencies, alerts, critical, errors, warnings, notifications, informational, or debugging. The default is 4. Defaults 4 or warnings Command Modes CONFIGURATION Command History Version 8.3.16.1 Introduced on MXL 10/40GbE Switch IO Module Usage When you configure the snmp-server trap-source command, the system messages logged to the history Information table are also sent to the SNMP network management station. Related Commands show logging history Displays information logged to the history buffer. logging history size Specify the number of messages stored in the FTOS logging history table. Syntax logging history size size To return to the default values, use the no logging history size command. Parameters size Indicate a value as the number of messages to be stored. Range: 0 to 500. Default: 1 message. Defaults 1 message Command Modes CONFIGURATION Command History Version 8.3.16.1 Introduced on MXL 10/40GbE Switch IO Module Simple Network Management Protocol (SNMP) and Syslog | 599