Dell Force10 MXL Blade MXL 10/40GbE Switch IO Module FTOS Command Line Referen - Page 364
advertise med guest-voice-signaling
View all Dell Force10 MXL Blade manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 364 highlights
www.dell.com | support.dell.com DSCP_value priority-tagged number Enter the DSCP value. Range: 0 to 63 Enter the keyword priority-tagged followed the Layer 2 priority. Range: 0 to 7 Defaults Unconfigured Command Modes CONFIGURATION (conf-lldp) Command History Version 8.3.16.1 Introduced on MXL 10/40GbE Switch IO Module Related Commands protocol lldp (Configuration) debug lldp interface show lldp neighbors show running-config lldp Enables LLDP globally. Debugs LLDP. Displays the LLDP neighbors. Displays the LLDP running configuration. advertise med guest-voice-signaling Configure the system to advertise a separate limited voice service for a guest user when the guest voice control packets use a separate network policy than the voice data. Syntax advertise med guest-voice-signaling {vlan-id layer2_priority DSCP_value} | {priority-tagged number} To return to the default, use the no advertise med guest-voice-signaling {vlan-id layer2_priority DSCP_value} | {priority-tagged number} command. Parameters vlan-id layer2_priority DSCP_value priority-tagged number Enter the VLAN ID. Range: 1 to 4094 Enter the Layer 2 priority. Range: 0 to 7 Enter the DSCP value. Range: 0 to 63 Enter the keyword priority-tagged followed the Layer 2 priority. Range: 0 to 7 Defaults unconfigured Command Modes CONFIGURATION (conf-lldp) Command History \ Version 8.3.16.1 Introduced on MXL 10/40GbE Switch IO Module Related Commands debug lldp interface show lldp neighbors show running-config lldp Debugs LLDP Displays the LLDP neighbors Displays the LLDP running configuration 364 | Link Layer Discovery Protocol (LLDP)