Dell Force10 MXL Blade MXL 10/40GbE Switch IO Module FTOS Command Line Referen - Page 14

www.dell.com | support.dell.com Figure 2-3 shows the results of entering ip ? at the prompt. Figure 2-3. Partial Keyword Example FTOS(conf)#ip ? access-list control-plane dhcp domain-list domain-lookup domain-name ftp helper-address host igmp max-frag-count mroute msdp multicast-limit multicast-msdp multicast-routing name-server pim prefix-list radius route scp source-route ssh tacacs telnet tftp Named access-list Control plane configuration DHCP configuration commands Domain name to complete unqualified host name Enable IP Domain Name System hostname translation Define the default domain name FTP configuration commands DHCP relay agent configuration Add an entry to the ip hostname table Internet Group Management Protocol Max. fragmented packets allowed in IP re-assembly Multicast routes and counters Multicast source discovery protocol Max entries in Multicast TIB Enable IP multicast MSDP protocol Enable IP multicast forwarding Specify addess of name server to use Protocol Independent Multicast Build a prefix list Interface configuration for RADIUS Establish static routes SCP configuration commands Process packets with source routing header options SSH configuration commands Interface configuration for TACACS+ Specify telnet options TFTP configuration commands When entering commands, you can take advantage of the following time saving features: • The commands are not case sensitive. • You can enter partial (truncated) command keywords. For example, you can enter int tengig interface for the interface tengigabitethernet interface command. • Use the TAB key to complete keywords in commands. • Use the up arrow key to display the last enabled command. • Use either the Backspace key or the Delete key to erase the previous character. 14 | CLI Basics