Dell Force10 MXL Blade MXL 10/40GbE Switch IO Module FTOS Command Line Referen - Page 547
username
View all Dell Force10 MXL Blade manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 547 highlights
Command Modes LINE Command History Version 8.3.16.1 Introduced on MXL 10/40GbE Switch IO Module Usage Information The software measures the period of inactivity defined in this command as the period between consecutive keystrokes. For example, if your password is "password" you can enter "p" and wait 29 seconds to enter the next letter. username Establish an authentication system based on user names. Syntax username name [access-class access-list-name] [nopassword | {password | secret} [encryption-type] password] [privilege level] If you do not want a specific user to enter a password, use the nopassword option. To delete authentication for a user, use the no username name command. Parameters name access-class access-list-name nopassword password secret encryption-type password privilege level secret Enter a text string for the name of the user up to 63 characters. Enter the keyword access-class followed by the name of a configured access control list (either an IP access control list or MAC access control list). Enter the keyword nopassword to specify that the user should not enter a password. Enter the keyword password followed by the encryption-type or the password. Enter the keyword secret followed by the encryption-type or the password. Enter an encryption type for the password that you will enter. • 0 directs FTOS to store the password as clear text. It is the default encryption type when using the password option. • 7 to indicate that a password encrypted using a DES hashing algorithm will follow. This encryption type is available with the password option only. • 5 to indicate that a password encrypted using an MD5 hashing algorithm will follow. This encryption type is available with the secret option only, and is the default encryption type for this option. Enter a string up to 32 characters long. Enter the keyword privilege followed by a number from zero (0) to 15. Enter the keyword secret followed by the encryption type. Defaults The default encryption type for the password option is 0. The default encryption type for the secret option is 0. Command Modes CONFIGURATION Command History Version 8.3.16.1 Introduced on MXL 10/40GbE Switch IO Module Usage To view the defined user names, use the show running-config user command. Information Security | 547