Dell Force10 MXL Blade MXL 10/40GbE Switch IO Module FTOS Command Line Referen - Page 546

www.dell.com | support.dell.com show users View information on all users logged into the switch. Syntax show users [all] Parameters all (OPTIONAL) Enter the keyword all to view all terminal lines in the switch. Command Modes EXEC Privilege Command History Example Version 8.3.16.1 Introduced on MXL 10/40GbE Switch IO Module Figure 29-4. show users Command Example FTOS#show user Line 0 console 0 * 3 vty 1 FTOS# User admin admin Host(s) idle idle Location 172.31.1.4 Table 1 describes the information in the show users command example. Table 1 show users Command Description Field (untitled) Line User Host(s) Location Description Indicates with am asterisk (*) which terminal line you are using. Displays the terminal lines currently in use. Displays the user name of all users logged in. Displays the terminal line status. Displays the IP address of the user. Related Commands username Enables a user. timeout login response Specify how long the software will wait for login input (for example, user name and password) before timing out. Syntax timeout login response seconds To return to the default values, use the no timeout login response command. Parameters seconds Enter a number of seconds the software will wait before logging you out. Range: VTY: 1 to 30 seconds, default: 30 seconds. Console: 1 to 300 seconds, default: 0 seconds (no timeout). AUX: 1 to 300 seconds, default: 0 seconds (no timeout). Defaults see above 546 | Security