Dell Force10 MXL Blade MXL 10/40GbE Switch IO Module FTOS Command Line Referen - Page 428

www.dell.com | support.dell.com Table 21-13. show ip ospf statistics process-id global Error Descriptions Error Type Intf_Down Non-Dr Self-Org Wrong_Len Invld-Nbr Nbr-State Auth-Error MD5-Error Cksum-Err Version AreaMismatch Conf-Issue No-Buffer Seq-no Socket Q-overflow Unknown-Pkt RtidZero Description Received packets on an interface that is either down or OSPF is not enabled. Received packets with a destination address of ALL_DRS even though SELF is not a designated router Receive the self originated packet The received packet length is different to what was indicated in the OSPF header LSA, LSR, LSU, and DDB are received from a peer which is not a neighbor peer LSA, LSR, and LSU are received from a neighbor with stats less than the loading state Simple authentication error MD5 error Checksum Error Version mismatch Area mismatch The received hello packet has a different hello or dead interval than the configuration Buffer allocation failure A sequence no errors occurred during the database exchange process Socket Read/Write operation error Packet(s) dropped due to queue overflow Received packet is not an OSPF packet Router-id received from the peer is 0.0.0.0. The show ip ospf process-id statistics command displays the error packet count received on each interface as: • The hello-timer remaining value for each interface • The wait-timer remaining value for each interface • The grace-timer remaining value for each interface • The packet count received and transmitted for each neighbor • Dead timer remaining value for each neighbor • Transmit timer remaining value for each neighbor • The LSU Q length and its highest mark for each neighbor • The LSR Q length and its highest mark for each neighbor 428 | Open Shortest Path First (OSPFv2)