Dell Force10 MXL Blade MXL 10/40GbE Switch IO Module FTOS Command Line Referen - Page 446

www.dell.com | support.dell.com Table 23-2 defines the fields in the output. Table 23-2. show interfaces Command Description Field Primary Secondary Type Active Ports Description Displays the VLAN ID of the designated or associated primary VLAN(s) Displays the VLAN ID of the designated or associated secondary VLAN(s Displays the type of VLAN in which the listed interfaces reside States whether the interface is operationally up or down Displays the interface IDs in the listed VLAN. Related Commands private-vlan mode show interfaces private-vlan show vlan private-vlan mapping switchport mode private-vlan Sets the mode of the selected VLAN to either community or isolated. Displays the type and status of PVLAN interfaces. Displays the primary-secondary VLAN mapping. Sets the PVLAN mode of the selected port. show vlan private-vlan mapping Display primary-secondary VLAN mapping. Syntax show vlan private-vlan mapping Defaults none Command Modes EXEC EXEC Privilege Command History Version 8.3.16.1 Introduced on MXL 10/40GbE Switch IO Module Usage The output of this command (Figure 23-10), displays the community and isolated VLAN IDs that are Information associated with each primary VLAN. Figure 23-10. show vlan private-vlan mapping Command Output FTOS# show vlan private-vlan mapping Private Vlan: Primary : 100 Isolated : 102 Community : 101 Unknown : 200 Related Commands private-vlan mode show interfaces private-vlan show vlan private-vlan mapping switchport mode private-vlan Sets the mode of the selected VLAN to either community or isolated. Displays the type and status of PVLAN interfaces. Displays the primary-secondary VLAN mapping. Sets PVLAN mode of the selected port. 446 | Private VLAN (PVLAN)