Dell Force10 MXL Blade MXL 10/40GbE Switch IO Module FTOS Command Line Referen - Page 582

www.dell.com | support.dell.com Command Modes Example EXEC EXEC Privilege Figure 31-4. show snmp user Command Example FTOS#show snmp user User name: v1v2creadu Engine ID: 0000178B02000001E80214A8 storage-type: nonvolatile active Authentication Protocol: None Privacy Protocol: None FTOS# Command History Version 8.3.16.1 Introduced on MXL 10/40GbE Switch IO Module snmp ifmib ifalias long Display the entire description string through the Interface MIB, which would be truncated otherwise to 63 characters. Syntax snmp ifmib ifalias long Defaults Interface description truncated beyond 63 characters Command Modes CONFIGURATION Command History Version 8.3.16.1 Introduced on MXL 10/40GbE Switch IO Module Example Figure 31-5. snmp ifmib ifalias long Command Example !------command run on host connected to switch snmpwalk -c public 10.10.10.130 .1.3.6.1.2.1.31 | grep -i alias | more IF-MIB::ifAlias.134530304 = STRING: This is a port connected to Router2. This is a port connected to IF-MIB::ifAlias.134792448 = STRING: !------command run on Dell Force10 switch FTOS#snmp ifmib ifalias long !------command run on server connected to switch snmpwalk -c public 10.10.10.130 .1.3.6.1.2.1.31 | grep -i alias | more IF-MIB::ifAlias.134530304 = STRING: This is a port connected to Router2. This is a port connected to Router2. This is a port connected to Router2. This is a port connected to Router2. This is a port connected to Router2. IF-MIB::ifAlias.134792448 = STRING: snmp-server community Configure a new community string access for SNMPv1, v2, and v3. Syntax snmp-server community community-name {ro | rw} [security-name name] [access-list-name] To remove access to a community, use the no snmp-server community community-string {ro | rw} [security-name name] [access-list-name] command. 582 | Simple Network Management Protocol (SNMP) and Syslog