Dell Force10 MXL Blade MXL 10/40GbE Switch IO Module FTOS Command Line Referen - Page 281

Related Commands group show interfaces port-channel Groups two LAGs in a supergroup ("fate-sharing group"). Displays information on configured Port Channel groups. show config Display the current configuration of the selected LAG. Syntax show config Command Modes INTERFACE PORTCHANNEL Example Figure 14-41. show config Command Sample Output for a Selected LAG FTOS(conf-if-po-1)#show config ! interface Port-channel 1 no ip address shutdown FTOS(conf-if-po-1)# Command History Version 8.3.16.1 Introduced on MXL 10/40GbE Switch IO Module show interfaces port-channel Display information on configured Port Channel groups. Syntax show interfaces port-channel [channel-number] [brief] Parameters channel-number brief For a Port Channel interface, enter the keyword port-channel followed by a number: Range: 1-128 (OPTIONAL) Enter the keyword brief to display only the port channel number, the state of the port channel, and the number of interfaces in the port channel. Command Modes EXEC EXEC Privilege Command History Version 8.3.16.1 Introduced on MXL 10/40GbE Switch IO Module Interfaces | 281