Dell Force10 MXL Blade MXL 10/40GbE Switch IO Module FTOS Command Line Referen - Page 344
show mac-address-table count Command Example, Table 18-1.
View all Dell Force10 MXL Blade manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 344 highlights
www.dell.com | support.dell.com vlan vlan-id count (OPTIONAL) Enter the keyword vlan followed by the VLAN ID to display the MAC address assigned to the VLAN. Range: 1 to 4094. (OPTIONAL) Enter the keyword count, followed optionally, by an interface or VLAN ID, to display total or interface-specific static addresses, dynamic addresses, and MAC addresses in use. Command Modes EXEC EXEC Privilege Command History Example Version 8.3.16.1 Introduced on MXL 10/40GbE Switch IO Module Figure 18-1. show mac-address-table Command Example FTOS#show mac-address-table VlanId Mac Address 20 00:00:c9:ad:f6:12 FTOS# Type Interface Dynamic Te 0/3 State Active Table 18-1. show mac-address-table Command Information Column Heading VlanId Mac Address Type Interface State Description Displays the VLAN ID number. Displays the MAC address in nn:nn:nn:nn:nn:nn format. Lists whether the MAC address was manually configured (Static) or learned dynamically (Dynamic). Displays the interface type and slot/port information. The following abbreviations describe the interface types: • tengig - Ten Gigabit Ethernet followed by a slot/port. • po - Port Channel followed by a number. Range: 1 to 32 for EtherScale, 1 to 255 for TeraScale • so - Sonet followed by a slot/port. • te - 10-Gigabit Ethernet followed by a slot/port. Lists if the MAC address is in use (Active) or not in use (Inactive). Figure 18-2. show mac-address-table count Command Example FTOS#show mac-address-table count MAC Entries for all vlans : Dynamic Address Count : 5 Static Address (User-defined) Count : 0 Total MAC Addresses in Use: 5 FTOS# 344 | Layer 2