Dell Force10 MXL Blade MXL 10/40GbE Switch IO Module FTOS Command Line Referen - Page 182
show interface pfc statistics, show qos dcb-input
View all Dell Force10 MXL Blade manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 182 highlights
www.dell.com | support.dell.com show interface pfc statistics Displays counters for the PFC frames received and transmitted (by dot1p priority class) on an interface. Syntax show interface port-type slot/port pfc statistics Parameters port-type slot/port Enter the port type. Enter the slot/port number. Command Mode INTERFACE Command History Version 8.3.16.1 Introduced on MXL 10/40GbE Switch IO Module Example Figure 9-5. show interfaces pfc statistics Command Example FTOS#show interface tengigabitethernet 0/3 pfc statistics Interface TenGigabitEthernet 0/3 Priority Rx XOFF Frames Rx Total Frames Tx Total Frames 0 0 0 0 1 0 0 0 2 0 0 0 3 0 0 0 4 0 0 0 5 0 0 0 6 0 0 0 7 0 0 0 show qos dcb-input Displays the PFC configuration in a DCB input policy. Syntax show qos dcb-input [pfc-profile] Parameters [pfc-profile] Enter the PFC profile. Command Mode CONFIGURATION Command History Version 8.3.16.1 Introduced on MXL 10/40GbE Switch IO Module Example Figure 9-6. show qos dcb-input Command Example FTOS(conf)# show qos dcb-input dcb-input pfc-profile pfc link-delay 32 pfc priority 0-1 dcb-input pfc-profile1 no pfc mode on pfc priority 6-7 182 | Data Center Bridging