Dell Force10 MXL Blade MXL 10/40GbE Switch IO Module FTOS Command Line Referen - Page 494

www.dell.com | support.dell.com default-metric Change the default metric for routes. Use this command with the redistribute command to ensure that all redistributed routes use the same metric value. Syntax default-metric number To return the default metric to the original values, use the no default-metric command. Parameters number Specify a number. Range: 1 to 16. The default is 1. Default 1 Command Modes ROUTER RIP Command History Version 8.3.16.1 Introduced on MXL 10/40GbE Switch IO Module Usage This command ensures that route information being redistributed is converted to the same metric value. Information Related Commands redistribute Allows you to redistribute routes learned by other methods. description Enter a description of the RIP routing protocol Syntax description {description} To remove the description, use the no description {description} command. Parameters description Enter a description to identify the RIP protocol (80 characters maximum). Defaults none Command Modes ROUTER RIP Command History Related Commands Version 8.3.16.1 Introduced on MXL 10/40GbE Switch IO Module router rip Enters ROUTER mode on the switch. 494 | Routing Information Protocol (RIP)