Dell Force10 MXL Blade MXL 10/40GbE Switch IO Module FTOS Command Line Referen - Page 334
port-channel-protocol lacp, Table 17-1., LACP Modes,
View all Dell Force10 MXL Blade manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 334 highlights
www.dell.com | support.dell.com Parameters number active passive off Enter the keyword port-channel followed by a number: Range: 1 to 128 Enter the keyword active to set the mode to the active state.* Enter the keyword passive to set the mode to the passive state.* Enter the keyword off to set the mode to the off state.* * The LACP modes are defined in Table 17-1. Defaults off Command Modes INTERFACE-LACP Command History Version 8.3.16.1 Introduced on MXL 10/40GbE Switch IO Module Usage Information Table 17-1 lists the LACP modes. Table 17-1. LACP Modes Mode active passive off Function An interface is in an active negotiating state in this mode. LACP runs on any link configured in the active state and also automatically initiates negotiation with other ports by initiating LACP packets. An interface is not in an active negotiating state in this mode. LACP runs on any link configured in the passive state. Ports in a passive state respond to negotiation requests from other ports that are in active states. Ports in a passive state respond to LACP packets. An interface can not be part of a dynamic port channel in the off mode. LACP will not run on a port configured in the off mode. port-channel-protocol lacp Enable LACP on any LAN port. Syntax port-channel-protocol lacp To disable LACP on a LAN port, use the no port-channel-protocol lacp command. Command Modes INTERFACE Command History Example Version 8.3.16.1 Introduced on MXL 10/40GbE Switch IO Module Figure 17-1. port-channel-protocol lacp Command Example FTOS(conf)#interface TenGigabitethernet 3/15 FTOS(conf-if-tengig-3/15)#no shutdown FTOS(conf-if-tengig-3/15)#port-channel-protocol lacp FTOS(conf-if-tengig-3/15-lacp)#port-channel 32 mode active ... FTOS(conf)#interface TenGigabitethernet 3/16 FTOS(conf-if-tengig-3/16)#no shutdown FTOS(conf-if-tengig-3/16)#port-channel-protocol lacp FTOS(conf-if-tengig-3/16-lacp)#port-channel 32 mode active 334 | Link Aggregation Control Protocol (LACP)