Dell Force10 MXL Blade MXL 10/40GbE Switch IO Module FTOS Command Line Referen - Page 124
mac access-list extended
View all Dell Force10 MXL Blade manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 124 highlights
www.dell.com | support.dell.com ethertype operator count byte (OPTIONAL) To filter based on protocol type, enter one of the following Ethertypes: • ev2 - is the Ethernet II frame format. • llc - is the IEEE 802.3 frame format. • snap - is the IEEE 802.3 SNAP frame format. (OPTIONAL) Enter the keyword count to count packets processed by the filter. (OPTIONAL) Enter the keyword byte to count bytes processed by the filter. Defaults Not configured. Command Modes CONFIGURATION-MAC ACCESS LIST-EXTENDED Command History Related Commands Version 8.3.16.1 Introduced on MXL 10/40GbE Switch IO Module permit seq Configures a filter to forward based on MAC addresses. Configures a filter with specific sequence numbers. mac access-list extended Name a new or existing extended MAC access control list (extended MAC ACL). Syntax mac access-list extended access-list-name Parameters access-list-name Enter a text string as the MAC access list name, up to 140 characters. Defaults No default configuration Command Modes CONFIGURATION Command History Version 8.3.16.1 Introduced on MXL 10/40GbE Switch IO Module Usage The number of entries allowed per ACL is hardware-dependent. For detailed specification on entries Information allowed per ACL, refer to your switch documentation. 124 | Access Control Lists (ACL)