Dell Force10 MXL Blade MXL 10/40GbE Switch IO Module FTOS Command Line Referen - Page 249
interface range macro, interface vlan, interface-range macro Command Example
View all Dell Force10 MXL Blade manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 249 highlights
interface range macro name Run the interface-range macro to automatically configure the pre-defined range of interfaces. Syntax interface range macro name Parameters name Enter the name of an existing macro. Defaults none Command Modes CONFIGURATION Command History Usage Information Version 8.3.16.1 Introduced on MXL 10/40GbE Switch IO Module Figure 14-18 runs the macro named test that was defined earlier. Example Figure 14-18. interface-range macro Command Example FTOS(conf)#interface range macro test FTOS(conf-if-range-te-0/0-3,tengig-5/0-47,tengig-13/0-89)# Related Commands interface range interface range macro (define) Configures a range of command (bulk configuration) Defines a macro for an interface range (bulk configuration) interface vlan Configure a VLAN. You can configure up to 4094 VLANs. Syntax interface vlan vlan-id To delete a VLAN, use the no interface vlan vlan-id command. Parameters vlan-id Enter a number as the VLAN Identifier. Range: 1 to 4094. Defaults Not configured, except for the Default VLAN, which is configured as VLAN 1. Command Modes CONFIGURATION Command History Example Version 8.3.16.1 Introduced on MXL 10/40GbE Switch IO Module Figure 14-19. interface vlan Command Example FTOS(conf)#int vlan 3 FTOS(conf-if-vl-3)# Usage For more information about VLANs and the commands to configure them, refer to Virtual LAN Information (VLAN) Commands. Interfaces | 249