Dell Force10 MXL Blade MXL 10/40GbE Switch IO Module FTOS Command Line Referen - Page 32
show startup-config, Partial
View all Dell Force10 MXL Blade manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 32 highlights
www.dell.com | support.dell.com configured status (OPTIONAL) Enter the keyword configuration to display line card interfaces with non-default configurations only. (OPTIONAL) Enter the keyword status to display the checksum for the running configuration and the start-up configuration. Command Modes EXEC Privilege Command History Version 8.3.16.1 Introduced on MXL 10/40GbE Switch IO Module Example Figure 3-9. show running-config Command Example (Partial) FTOS#show running-config Current Configuration ... ! Version E8-3-16-29 ! Last configuration change at Thu Apr 26 19:19:21 2012 by admin ! Startup-config last updated at Thu Apr 26 19:19:04 2012 by default ! boot system stack-unit 0 primary system: A: boot system stack-unit 0 secondary tftp://10.11.200.241/dt-m1000e-5-c2 boot system gateway 10.11.209.254 ! redundancy auto-synchronize full redundancy disable-auto-reboot stack-unit ! redundancy disable-auto-reboot stack-unit 0 redundancy disable-auto-reboot stack-unit 1 redundancy disable-auto-reboot stack-unit 2 redundancy disable-auto-reboot stack-unit 5 !--More-service timestamps log datetime logging coredump stack-unit all ! hostname FTOS ! ... Example Figure 3-10. show running-config Command Example FTOS#show running-config status running-config bytes 4306, checksum 0x4D55EE70 startup-config bytes 4344, checksum 0x6472C5E FTOS# Usage The status option allows you to display the size and checksum of the running configuration and the Information startup configuration. show startup-config Display the startup configuration. Syntax show startup-config Command Modes EXEC Privilege Command History Version 8.3.16.1 Introduced on MXL 10/40GbE Switch IO Module 32 | File Management