Dell Force10 MXL Blade MXL 10/40GbE Switch IO Module FTOS Command Line Referen - Page 376

www.dell.com | support.dell.com Parameters msti instance vlan range bridge-priority priority Enter the MST instance number. Range: 0 to 4094. Enter the keyword vlan followed by the identifier range value. Range: 1 to 4094 Enter the keyword bridge-priority followed by a value in increments of 4096 as the bridge priority. Range: zero (0) to 61440 Valid priority values are: 0, 4096, 8192, 12288, 16384, 20480, 24576, 28672, 32768, 36864, 40960, 45056, 49152, 53248, 57344, and 61440. All other values are rejected. Defaults default bridge-priority is 32768 Command Modes INTERFACE Command History Version 8.3.16.1 Introduced on MXL 10/40GbE Switch IO Module Usage By default, all VLANs are mapped to MST instance zero (0) unless you use the vlan range command Information to map it to a non-zero instance. Although MSTP instance IDs range from 0 to 4094, only 64 active instances are supported on the switch. name The name you assign to the multiple spanning tree region. Syntax name region-name To remove the region name, use the no name command. Parameters region-name Enter the MST region name. Range: 32 character limit Defaults Command Modes none MULTIPLE SPANNING TREE Command History Usage Information Version 8.3.16.1 Introduced on MXL 10/40GbE Switch IO Module For two MSTP switches to be within the same MSTP region, the switches must share the same region name (including matching case). Related Commands msti revision Maps the VLAN(s) to an MST instance. Assigns the revision number to the MST configuration. 376 | Multiple Spanning Tree Protocol (MSTP)