Dell Force10 MXL Blade MXL 10/40GbE Switch IO Module FTOS Command Line Referen - Page 478

www.dell.com | support.dell.com service-policy input Apply an input policy map to the selected interface. Syntax service-policy input policy-map-name [layer2] To remove the input policy map from the interface, use the no service-policy input policy-map-name [layer2] command. Parameters policy-map-name layer2 Enter the name for the policy map in character format (16 characters maximum). You can identify an existing policy map or name one that does not yet exist. (OPTIONAL) Enter the keyword layer2 to specify a Layer 2 Class Map. Default: Layer 3 Defaults Layer 3 Command Modes INTERFACE Command History Version 8.3.16.1 Introduced on MXL 10/40GbE Switch IO Module Usage A single policy-map can be attached to one or more interfaces to specify the service-policy for those Information interfaces. A policy map attached to an interface can be modified. Related Commands Note: The service-policy commands are not allowed on a port channel. The service-policy input policy-map-name command and the service-class dynamic dot1p command are not allowed simultaneously on an interface. policy-map-input Creates an input policy map. service-policy output Apply an output policy map to the selected interface. Syntax service-policy output policy-map-name To remove the output policy map from the interface, use the no service-policy output policy-map-name command. Parameters policy-map-name Enter the name for the policy map in character format (16 characters maximum). You can identify an existing policy map or name one that does not yet exist. Defaults none Command Modes INTERFACE Command History Version 8.3.16.1 Introduced on MXL 10/40GbE Switch IO Module 478 | Quality of Service (QoS)