Dell Force10 MXL Blade MXL 10/40GbE Switch IO Module FTOS Command Line Referen - Page 593

Figure 31-10 shows how to enter a plain-text password as the string authpasswd for user authuser of group v3group. Figure 31-10. snmp-server user Command Example (Plain-text) FTOS#conf FTOS(conf)# snmp-server user authuser v3group v3 auth md5 authpasswd Figure 31-11 configures a remote user named n3user with a v3 security model and a security level of authNOPriv. Figure 31-11. config Command Example FTOS#conf FTOS(conf)# snmp-server user n3user ngroup remote 172.31.1.3 udp-port 5009 3 auth md5 authpasswd Related Commands Note: The number of configurable users is limited to 16. show snmp user Displays the information configured on each SNMP user name. snmp-server view Configure an SNMPv3 view. Syntax snmp-server view view-name oid-tree {included | excluded} To remove an SNMPv3 view, use the no snmp-server view view-name oid-tree {included | excluded} command. Parameters view-name oid-tree included excluded Enter the name of the view (not to exceed 20 characters). Enter the OID sub tree for the view (not to exceed 20 characters). (OPTIONAL) Enter the keyword included to include the MIB family in the view. (OPTIONAL) Enter the keyword excluded to exclude the MIB family in the view. Defaults none Command Modes CONFIGURATION Command History Version 8.3.16.1 Introduced on MXL 10/40GbE Switch IO Module Usage The oid-tree variable is a full sub-tree starting from 1.3.6 and can not specify the name of a sub-tree or Information a MIB. Figure 31-12 configures a view named rview that allows access to all objects under 1.3.6.1. Example Figure 31-12. snmp-server view Command Example FTOS#(conf) snmp-server view rview 1.3.6.1 included Simple Network Management Protocol (SNMP) and Syslog | 593