Dell Force10 MXL Blade MXL 10/40GbE Switch IO Module FTOS Command Line Referen - Page 510
rmon event, rmon hc-alarm
View all Dell Force10 MXL Blade manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 510 highlights
www.dell.com | support.dell.com rmon event Add an event in the RMON event table. Syntax rmon event number [log] [trap community] [description string] [owner name] To disable RMON on an interface, use the no rmon event number [log] [trap community] [description string] command. Parameters number log trap community description string owner name Assign an event number in integer format from 1 to 65535. The number value must be unique in the RMON Event Table. (OPTIONAL) Enter the keyword log to generate an RMON log entry. The log entry is triggered and sets the eventType in the RMON MIB to log or log-and-trap. Default: No log (OPTIONAL) Enter the keyword trap followed by an SNMP community string to configure the eventType setting in the RMON MIB. This sets either snmp-trap or log-and-trap. Default: public (OPTIONAL) Enter the keyword description followed by a string describing the event. (OPTIONAL) Enter the keyword owner followed by the name of the owner of this event. Defaults as described above Command Modes CONFIGURATION Command History Version 8.3.16.1 Introduced on MXL 10/40GbE Switch IO Module rmon hc-alarm Set an alarm on any MIB object. Syntax rmon hc-alarm number variable interval {delta | absolute} rising-threshold value event-number falling-threshold value event-number [owner string] To disable the alarm, use the no rmon hc-alarm number command. Parameters number variable interval delta absolute Enter the alarm integer number from 1 to 65535. The value must be unique in the RMON Alarm Table. The MIB object to monitor. The variable must be in the SNMP OID format, for example, 1.3.6.1.2.1.1.3 The object type must be a 64 bit integer. Time, in seconds, the alarm monitors the MIB variables; this is the alarmSampleType in the RMON Alarm table. Range: 5 to 3600 seconds Enter the keyword delta to test the change between MIB variables. This is the alarmSampleType in the RMON Alarm table. Enter the keyword absolute to test each MIB variable directly. This is the alarmSampleType in the RMON Alarm table. 510 | Remote Monitoring (RMON)