Dell Force10 MXL Blade MXL 10/40GbE Switch IO Module FTOS Command Line Referen - Page 621
Spanning Tree Protocol (STP), Overview, bridge-priority
View all Dell Force10 MXL Blade manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 621 highlights
34 Spanning Tree Protocol (STP) Overview The commands described in this chapter configure and monitor the IEEE 802.1d spanning tree protocol (STP). The STP commands are: • bridge-priority • debug spanning-tree • description • disable • forward-delay • hello-time • max-age • portfast bpdufilter default • protocol spanning-tree • show config • show spanning-tree 0 • spanning-tree 0 bridge-priority Set the bridge priority of the switch in an IEEE 802.1D Spanning Tree. Syntax bridge-priority {priority-value | primary | secondary} To return to the default value, use the no bridge-priority command. Parameters priority-value primary secondary Enter a number as the bridge priority value. Range: 0 to 65535. Default: 32768. Enter the keyword primary to designate the bridge as the root bridge. Enter the keyword secondary to designate the bridge as a secondary root bridge. Defaults priority-value = 32768 Command Modes SPANNING TREE (The prompt is "conf-stp".) Spanning Tree Protocol (STP) | 621