Dell Force10 MXL Blade MXL 10/40GbE Switch IO Module FTOS Command Line Referen - Page 317
show ip route summary Command Example, Parameters, Command Modes, Command, History
View all Dell Force10 MXL Blade manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 317 highlights
Parameters prefix-list Enter the name of a configured prefix list. Command Modes EXEC EXEC Privilege Command History Related Commands Version 8.3.16.1 Introduced on MXL 10/40GbE Switch IO Module ip prefix-list show ip prefix-list summary Enters the CONFIGURATION-IP PREFIX-LIST mode and configure a prefix list. Displays a summary of the configured prefix lists. Example Figure 15-19. show ip route summary Command Example FTOS#show ip route list test Codes: C - connected, S - static, R - RIP, B - BGP, IN - internal BGP, EX - external BGP,LO - Locally Originated, O - OSPF, IA - OSPF inter area, N1 - OSPF NSSA external type 1, N2 - OSPF NSSA external type 2, E1 - OSPF external type 1, E2 - OSPF external type 2, i - IS-IS, L1 - IS-IS level-1, L2 - IS-IS level-2, IA - IS-IS inter area, * - candidate default, > - non-active route, + - summary route Gateway of last resort is not set Destination ----------R 2.1.0.0/24 R 2.1.1.0/24 R 2.1.2.0/24 R 2.1.3.0/24 C 2.1.4.0/24 Gateway ------via 2.1.4.1, TenGig 4/43 via 2.1.4.1, TenGig 4/43 via 2.1.4.1, TenGig 4/43 via 2.1.4.1, TenGig 4/43 Direct, TenGig 4/43 Dist/Metric Last Change 120/2 3d0h 120/2 3d1h 120/1 3d0h 120/1 3d1h 0/0 3d1h show ip route summary View a table summarizing the IP routes in the switch. Syntax show ip route summary Command Modes EXEC EXEC Privilege Command History Version 8.3.16.1 Introduced on MXL 10/40GbE Switch IO Module IPv4 Routing | 317