Dell Force10 MXL Blade MXL 10/40GbE Switch IO Module FTOS Command Line Referen - Page 656

www.dell.com | support.dell.com • Dell Force10 recommends not using the same MAC address, on different customer VLANs, on the same stackable VLAN. • Interfaces configured using stackable VLAN access or stackable VLAN trunk commands do not switch traffic for the default VLAN. These interfaces switch traffic only when they are added to a non-default VLAN. dei enable Make packets eligible for dropping based on their drop eligible indicator (DEI) value. Syntax Defaults dei enable Packets are colored green; no packets are dropped. Command Mode CONFIGURATION Command History Version 8.3.16.1 Introduced on MXL 10/40GbE Switch IO Module dei honor Honor the incoming DEI value by mapping it to an FTOS drop precedence. You can enter the command once for 0 and once for 1. Syntax dei honor {0 | 1} {green | red | yellow} Parameters 0 | 1 green | red | yellow Enter the bit value you want to map to a color. Choose a color: • Green: High priority packets that are the least preferred to be dropped. • Yellow: Lower priority packets that are treated as best-effort. • Red: Lowest priority packets that are always dropped (regardless of congestion status). Defaults Disabled; packets with an unmapped DEI value are colored green. Command Mode INTERFACE Command History Usage Information Version 8.3.16.1 Introduced on MXL 10/40GbE Switch IO Module You must first enable DEI for this configuration to take effect. Related Commands dei enable Enables DEI. 656 | VLAN Stacking