Dell Force10 MXL Blade MXL 10/40GbE Switch IO Module FTOS Command Line Referen - Page 677

online stack-unit Place a stack unit in the online state. Syntax online stack-unit number Parameters number Enter the stack unit number. range: 0 to 5 Defaults Command Mode Command History none EXEC Privilege H Version 8.3.16.1 Introduced on MXL 10/40GbE Switch IO Module Buffer Tuning Commands The buffer tuning commands are: • buffer (Buffer Profile) • buffer (Configuration) • buffer-profile (Configuration) • buffer-profile (Interface) • show buffer-profile • show buffer-profile interface Warning: Altering the buffer allocations is a sensitive operation. Do not use any buffer tuning commands without first contacting the Dell Force10 Technical Assistance Center (TAC). buffer (Buffer Profile) Allocate an amount of dedicated buffer space, dynamic buffer space, or packet pointers to queues 0 to 3. Syntax buffer [dedicated | dynamic | packets-pointers] queue0 number queue1 number queue2 number queue3 number Parameters dedicated dynamic packets-pointers Enter this keyword to configure the amount of dedicated buffer space per queue. Enter this keyword to configure the amount of dynamic buffer space per Field Processor. Enter this keyword to configure the number of packet pointers per queue. Debugging and Diagnostics | 677