Dell Force10 MXL Blade MXL 10/40GbE Switch IO Module FTOS Command Line Referen - Page 429
show ip ospf timers rate-limit,
View all Dell Force10 MXL Blade manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 429 highlights
Example Figure 21-18. show ip ospf process-id statistics Command Example FTOS#show ip ospf 10 statistics Interface TenGigabitEthernet 4/45 Error packets (Receive statistics) Intf-Down 0 Non-Dr 0 Self-Org 0 Wrong-Len 0 Invld-Nbr 0 Nbr-State 0 Auth-Error 0 MD5-Error 0 Cksum-Err 0 Version 0 AreaMisMatch 0 Conf-Issue 0 SeqNo-Err 0 Unknown-Pkt 0 Bad-LsReq 0 RtidZero 0 Neighbor ID 3.1.1.2 Packet Statistics Hello DDiscr LSReq LSUpd LSAck RX 47 2 1 3 2 TX 46 3 1 3 2 Timers Hello 1 Wait 0 Grace 0 Dead 37 Transmit 0 Queue Statistics LSU-Q-Len 0 LSU-Q-Wmark 1 LSR-Q-Len 0 LSR-Q-Wmark 1 FTOS# Related Commands clear ip ospf statistics Clears the packet statistics in all interfaces and neighbors show ip ospf timers rate-limit Show the LSA currently in the queue waiting for timers to expire. Syntax show ip ospf process-id timers rate-limit Parameters process-id Enter the OSPF Process ID to show a specific process. If no Process ID is entered, command applies only to the first OSPF process. Defaults none Command Modes EXEC EXEC Privilege Command History Example Version 8.3.16.1 Introduced on MXL 10/40GbE Switch IO Module Figure 21-19. show ip ospf process-id timers rate-limit Command Example FTOS#show ip ospf 10 timers rate-limit List of LSAs in rate limit Queue LSA id: 1.1.1.0 Type: 3 Adv Rtid: 3.3.3.3 Expiry time: 00:00:09.111 LSA id: 3.3.3.3 Type: 1 Adv Rtid: 3.3.3.3 Expiry time: 00:00:23.96 FTOS# Open Shortest Path First (OSPFv2) | 429