Dell Force10 MXL Blade MXL 10/40GbE Switch IO Module FTOS Command Line Referen - Page 486
test cam-usage, show qos wred-profile Command Example
View all Dell Force10 MXL Blade manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 486 highlights
www.dell.com | support.dell.com Example Figure 25-10. show qos wred-profile Command Example FTOS#show qos wred-profile Wred-profile-name wred_drop wred_ge_y wred_ge_g wred_teng_y wred_teng_g WRED1 min-threshold 0 1024 2048 4096 8192 2000 max-threshold 0 2048 4096 8192 16384 7000 test cam-usage Check the Input Policy Map configuration for the CAM usage. Syntax test cam-usage service-policy input policy-map stack-unit {[number] | [all]} Parameters policy-map stack-unit number stack-unit all Enter the policy map name. (OPTIONAL) Enter the keyword stack-unit followed by the stack-unit number. (OPTIONAL) Enter the keywords stack-unit all to indicate all stack units. Defaults none Command Modes EXEC Command History Example Version 8.3.16.1 Introduced on MXL 10/40GbE Switch IO Module Figure 25-11. test cam-usage service-policy input policy-map stack-unit all Command Example FTOS# test cam-usage service-policy input pmap_l2 stack-unit all For a L2 Input Policy Map pmap_l2, the output must be as follows, Stack-unit Status| Portpipe | CAM Partition | Available CAM | Estimated CAM| Status | | | | per Port | (Allowed ports) 0 0 L2ACL 0 1 L2ACL 1 0 L2ACL 1 1 L2ACL ... ... ... 13 1 L2ACL FTOS# 500 100 1000 0 400 200 200 200 200 200 Allowed (2) Exception Allowed (5) Exception Allowed (2) Note: In a Layer 2 Policy Map, IPv4 rules are not allowed and hence the output contains only L2ACL CAM partition entries. 486 | Quality of Service (QoS)