Dell Force10 MXL Blade MXL 10/40GbE Switch IO Module FTOS Command Line Referen - Page 197

renew dhcp interface Re-acquire a dynamic IP address on an Ethernet interface enabled as a DHCP client. Syntax Parameters renew dhcp interface type slot/port interface type slot/ port For a 10-GigabitEthernet Ethernet interface, enter TenGigabitEthernet followed by the slot/port numbers; for example, tengigabitethernet 1/3. For a 40-GigabitEthernet Ethernet interface, enter FortyGigabitEthernet followed by the slot/port numbers; for example, fortygigabitethernet 0/2. Command Mode EXEC Privilege Default None. Command History Usage Information Version 8.3.16.1 Introduced on MXL 10/40GbE Switch IO Module When you enter the renew dhcp command, a new dynamic IP address is acquired on the specified Ethernet interface for the renewed lease time. To display the currently configure dynamic IP address and lease time, enter the show ip dhcp lease command. show ip dhcp client statistics Display DHCP client statistics, including the number of DHCP messages sent and received on an interface. Syntax show ip dhcp client statistics {all | interface type slot/port} Parameters all interface type slot/ port Display DHCP client statistics on all DHCP client-enabled interfaces on the switch. Display DHCP client statistics on the specified interface. For a 10-GigabitEthernet Ethernet interface, enter TenGigabitEthernet followed by the slot/port numbers; for example, tengigabitethernet 1/3. For a 40-GigabitEthernet Ethernet interface, enter FortyGigabitEthernet followed by the slot/port numbers; for example, fortygigabitethernet 0/2. Command Mode EXEC Privilege Default None. Command History Version 8.3.16.1 Introduced on MXL 10/40GbE Switch IO Module show ip dhcp lease Display lease information about the dynamic IP address currently assigned to a DHCP client-enabled interface. Syntax show ip dhcp lease [interface type slot/port] Dynamic Host Configuration Protocol (DHCP) | 197