Dell Force10 MXL Blade MXL 10/40GbE Switch IO Module FTOS Command Line Referen - Page 207
Syntax, Defaults, Command Modes, Command, History, Usage, Information, Parameters, VLAN INTERFACE
View all Dell Force10 MXL Blade manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 207 highlights
fip-snooping enable Enable FIP snooping on all VLANs or on a specified VLAN. Syntax fip-snooping enable To disable the FIP snooping feature on all or a specified VLAN, use the no fip-snooping enable command. Defaults FIP snooping is disabled on all VLANs. Command Modes • CONFIGURATION • VLAN INTERFACE Command History Version 8.3.16.1 Introduced on MXL 10/40GbE Switch IO Module Usage The maximum number of FCFs supported per FIP snooping-enabled VLAN is four. The maximum Information number of FIP snooping sessions supported per ENode server is 16. fip-snooping fc-map Configure the FC-MAP value used by FIP snooping on all VLANs. Syntax fip-snooping fc-map fc-map-value To remove the configured FM-MAP value, use the no fip-snooping fc-map command. Parameters fc-map-value Enter the FC-MAP value used by FIP snooping. The valid values are from 0EFC00 to 0EFCFF. Defaults 0x0EFC00 Command Mode • CONFIGURATION • VLAN INTERFACE Command History Version 8.3.16.1 Introduced on MXL 10/40GbE Switch IO Module fip-snooping port-mode fcf Configure the port for bridge-to-FCF links. Syntax fip-snooping port-mode fcf To disable the bridge-to-FCF link on a port, use the no fip-snooping port-mode fcf command. Command Modes INTERFACE Command History Usage Information Version 8.3.16.1 Introduced on MXL 10/40GbE Switch IO Module The maximum number of FCFs supported per FIP snooping-enabled VLAN is four. FIP Snooping | 207