Dell Force10 MXL Blade MXL 10/40GbE Switch IO Module FTOS Command Line Referen - Page 388

www.dell.com | support.dell.com area range Summarize routes matching an address/mask at an area border router (ABR). Syntax area area-id range ip-address mask [not-advertise] To disable route summarization, use the no area area-id range ip-address mask command. Parameters area-id ip-address mask not-advertise Specify the OSPF area in dotted decimal format (A.B.C.D.) or enter a number from zero (0) to 65535. Specify an IP address in dotted decimal format. Specify a mask for the destination prefix. Enter the full mask (for example, 255.255.255.0). (OPTIONAL) Enter the keyword not-advertise to set the status to DoNotAdvertise (that is, the Type 3 summary-LSA is suppressed and the component networks remain hidden from other areas.) Defaults No range is configured. Command Modes ROUTER OSPF Command History Usage Information Version 8.3.16.1 Introduced on MXL 10/40GbE Switch IO Module Only the routes within an area are summarized, and that summary is advertised to other areas by the ABR. External routes are not summarized. Related Commands area stub router ospf Creates a stub area. Enters ROUTER OSPF mode to configure an OSPF instance. area stub Configure a stub area, which is an area not connected to other areas. Syntax area area-id stub [no-summary] To delete a stub area, use the no area area-id stub command. Parameters area-id no-summary Specify the stub area in dotted decimal format (A.B.C.D.) or enter a number from zero (0) to 65535. (OPTIONAL) Enter the keyword no-summary to prevent the ABR from sending summary Link State Advertisements (LSAs) into the stub area. Defaults Disabled Command Modes ROUTER OSPF Command History Usage Information Version 8.3.16.1 Introduced on MXL 10/40GbE Switch IO Module Use this command to configure all routers and access servers within a stub. 388 | Open Shortest Path First (OSPFv2)