Dell Force10 MXL Blade MXL 10/40GbE Switch IO Module FTOS Command Line Referen - Page 460
vlan max-age
View all Dell Force10 MXL Blade manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 460 highlights
www.dell.com | support.dell.com Related Commands vlan bridge-priority vlan forward-delay vlan max-age show spanning-tree pvst Set the bridge-priority value Change the time interval before FTOS transitions to the forwarding state Change the time interval before PVST+ refreshes Display the PVST+ configuration vlan max-age Set the time interval for the PVST+ bridge to maintain configuration information before refreshing that information. Syntax vlan vlan-range max-age seconds To return to the default, use the no vlan max-age command. Parameters vlan vlan-range max-age seconds Enter the keyword vlan followed by the VLAN number(s). Range: 1 to 4094 Enter the keyword max-age followed by the time interval, in seconds, that FTOS waits before refreshing configuration information. Range: 6 to 40 seconds Default: 20 seconds Defaults 20 seconds Command Modes CONFIGURATION (conf-pvst) Command History Version 8.3.16.1 Introduced on MXL 10/40GbE Switch IO Module Related Commands vlan bridge-priority vlan forward-delay vlan hello-time show spanning-tree pvst Set the bridge-priority value Change the time interval before FTOS transitions to the forwarding state Change the time interval between BPDUs Display the PVST+ configuration 460 | Per-VLAN Spanning Tree Plus (PVST+)