Dell Force10 MXL Blade MXL 10/40GbE Switch IO Module FTOS Command Line Referen - Page 203
ip dhcp snooping verify mac-address
View all Dell Force10 MXL Blade manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 203 highlights
Parameters binding source-address-validation Display the binding table. Display the interfaces configured with IP Source Guard. Command Modes EXEC EXEC Privilege Default none Command History Related Commands Version 8.3.16.1 Introduced on MXL 10/40GbE Switch IO Module clear ip dhcp snooping Clears the contents of the DHCP binding table. ip dhcp snooping verify mac-address Validate a DHCP packet's source hardware address against the client hardware address field (CHADDR) in the payload. Syntax [no] ip dhcp snooping verify mac-address Command Modes CONFIGURATION Default Disabled Command History Version 8.3.16.1 Introduced on MXL 10/40GbE Switch IO Module Dynamic Host Configuration Protocol (DHCP) | 203
Dynamic Host Configuration Protocol (DHCP)
|
203
Parameters
Command Modes
EXEC
EXEC Privilege
Default
none
Command
History
Related
Commands
ip dhcp snooping verify mac-address
Validate a DHCP packet’s source hardware address against the client hardware address field
(CHADDR) in the payload.
Syntax
[no] ip dhcp snooping verify mac-address
Command Modes
CONFIGURATION
Default
Disabled
Command
History
binding
Display the binding table.
source-address-validation
Display the interfaces configured with IP Source Guard.
Version 8.3.16.1
Introduced on MXL 10/40GbE Switch IO Module
clear ip dhcp snooping
Clears the contents of the DHCP binding table.
Version 8.3.16.1
Introduced on MXL 10/40GbE Switch IO Module