Dell Force10 MXL Blade MXL 10/40GbE Switch IO Module FTOS Command Line Referen - Page 122

www.dell.com | support.dell.com count byte (OPTIONAL) Enter the keyword count to count packets processed by the filter. (OPTIONAL) Enter the keyword byte to count bytes processed by the filter. Defaults Not configured. Command Modes CONFIGURATION-MAC ACCESS LIST-STANDARD Command History Related Commands Version 8.3.16.1 Introduced on MXL 10/40GbE Switch IO Module deny Configures a MAC ACL filter to drop packets. seq Configures a MAC ACL filter with a specified sequence number. seq Assign a sequence number to a deny or permit filter in a MAC access list while creating the filter. Syntax seq sequence-number {deny | permit} {any | mac-source-address [mac-source-address-mask]} [count [byte]] Parameters sequence-number deny permit any mac-source-address mac-source-address-mask count byte Enter a number between 0 and 65535. Enter the keyword deny to configure a filter to drop packets meeting this condition. Enter the keyword permit to configure a filter to forward packets meeting this criteria. Enter the keyword any to filter all packets. Enter a MAC address in nn:nn:nn:nn:nn:nn format. (OPTIONAL) Specify which bits in the MAC address must match. If no mask is specified, a mask of 00:00:00:00:00:00 is applied (in other words, the filter allows only MAC addresses that match). (OPTIONAL) Enter the keyword count to count packets processed by the filter. (OPTIONAL) Enter the keyword byte to count bytes processed by the filter. Defaults Not configured. Command Modes CONFIGURATION-MAC ACCESS LIST-STANDARD Command History Related Commands Version 8.3.16.1 Introduced on MXL 10/40GbE Switch IO Module deny permit Configures a filter to drop packets. Configures a filter to forward packets. 122 | Access Control Lists (ACL)