Dell Force10 MXL Blade MXL 10/40GbE Switch IO Module FTOS Command Line Referen - Page 137

Command History Related Commands Version 8.3.16.1 Introduced on MXL 10/40GbE Switch IO Module match interface match ip address match ip next-hop match ip route-source match metric match tag Redistributes routes that match the next-hop interface. Redistributes routes that match an IP address. Redistributes routes that match the next-hop IP address. Redistributes routes that match routes advertised by other routers. Redistributes routes that match a specific metric. Redistributes routes that match a tag. match tag Configure a filter to redistribute only routes that match a specified tag value. Syntax match tag tag-value Parameters tag-value Enter a value as the tag on which to match. Range: zero (0) to 4294967295. Defaults Not configured Command Modes ROUTE-MAP Command History Version 8.3.16.1 Introduced on MXL 10/40GbE Switch IO Module Related Commands match interface match ip address match ip next-hop match ip route-source match metric match route-type Redistributes routes that match the next-hop interface. Redistributes routes that match an IP address. Redistributes routes that match the next-hop IP address. Redistributes routes that match routes advertised by other routers. Redistributes routes that match a specific metric. Redistributes routes that match a route type. route-map Enable a route map statement and configure its action and sequence number. This command also places you in ROUTE-MAP mode. Syntax Parameters route-map map-name [permit | deny] [sequence-number] map-name permit Enter a text string of up to 140 characters to name the route map for easy identification. (OPTIONAL) Enter the keyword permit to set the route map default as permit. If no keyword is specified, the default is permit. Access Control Lists (ACL) | 137