Dell Force10 MXL Blade MXL 10/40GbE Switch IO Module FTOS Command Line Referen - Page 473
match mac dot1p, match mac vlan, policy-aggregate
View all Dell Force10 MXL Blade manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 473 highlights
match mac dot1p Configure a match criterion for a class map, based on a dot1p value. Syntax match mac dot1p {dot1p-list} Parameters dot1p-list Enter a dot1p value. Range: 0 to 7 Defaults none Command Modes CLASS-MAP Command History Version 8.3.16.1 Introduced on MXL 10/40GbE Switch IO Module Usage You must enter the class-map command in order to access this command. After the class map is Information identified, you can configure the match criteria. Related Commands class-map Identifies the class map. match mac vlan Configure a match criterion for a class map based on VLAN ID. Syntax Parameters match mac vlan number number Enter the VLAN ID. Range: 1 to 4094 Defaults none Command Modes CLASS-MAP Command History Usage Information Version 8.3.16.1 Introduced on MXL 10/40GbE Switch IO Module You must first enter the class-map command in order to access this command. You can match against only one VLAN ID. Related Commands class-map Creates/accesses a class map. policy-aggregate Allow an aggregate method of configuring per-port QoS via policy maps. An aggregate QoS policy is part of the policy map (input/output) applied on an interface. Syntax policy-aggregate qos-policy-name To remove a policy aggregate configuration, use the no policy-aggregate qos-policy-name command. Quality of Service (QoS) | 473