Dell Force10 MXL Blade MXL 10/40GbE Switch IO Module FTOS Command Line Referen - Page 189
Default, Command, History, Syntax, Command Mode, Parameters, DHCP <POOL>
View all Dell Force10 MXL Blade manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 189 highlights
Default none Command History Version 8.3.16.1 Introduced on MXL 10/40GbE Switch IO Module disable Disable the DHCP server. DHCP Server is disabled by default. Enable the system to be a DHCP server using the no form of the disable command. Syntax disable Command Mode DHCP Default Disabled Command History Version 8.3.16.1 Introduced on MXL 10/40GbE Switch IO Module dns-server Assign a DNS server to clients based on address pool. Syntax Parameters dns-server address [address2...address8] address Enter the a list of DNS servers that may service clients on the subnet. You may list up to 8 servers, in order of preference. Command Mode DHCP Default none Command History Version 8.3.16.1 Introduced on MXL 10/40GbE Switch IO Module domain-name Assign a domain to clients based on address pool. Syntax domain-name name Parameters name Give a name to the group of addresses in a pool. Command Mode DHCP Default none Dynamic Host Configuration Protocol (DHCP) | 189