Dell Force10 MXL Blade MXL 10/40GbE Switch IO Module FTOS Command Line Referen - Page 195

Other Commands supported by DHCP Client • clear ip dhcp client statistics • debug ip dhcp clients events • debug ip dhcp clients packets • release dhcp interface • renew dhcp interface • show ip dhcp client statistics • show ip dhcp lease clear ip dhcp client statistics Display DHCP client statistics, including the number of DHCP messages sent and received on an interface. Syntax clear ip dhcp client statistics {all | interface type slot/port} Parameters all interface type slot/ port Clear DHCP client statistics on all DHCP client-enabled interfaces on the switch. Clear DHCP client statistics on the specified interface. For a 10-GigabitEthernet Ethernet interface, enter TenGigabitEthernet followed by the slot/port numbers; for example, tengigabitethernet 1/3. For a 40-GigabitEthernet Ethernet interface, enter FortyGigabitEthernet followed by the slot/port numbers; for example, fortygigabitethernet 0/2. Command Mode EXEC Privilege Default None. Command History Version 8.3.16.1 Introduced on MXL 10/40GbE Switch IO Module debug ip dhcp clients events Enable the display of log messages for the following events on DHCP client interfaces: • IP address acquisition • IP address release • Renewal of IP address and lease time • Release of an IP address Syntax debug ip dhcp client events [interface type slot/port] Parameters interface type slot/ port Display log messages for DHCP events on the specified interface. For a 10-GigabitEthernet Ethernet interface, enter TenGigabitEthernet followed by the slot/port numbers; for example, tengigabitethernet 1/3. For a 40-GigabitEthernet Ethernet interface, enter FortyGigabitEthernet followed by the slot/port numbers; for example, fortygigabitethernet 0/2. Dynamic Host Configuration Protocol (DHCP) | 195