Dell Force10 MXL Blade MXL 10/40GbE Switch IO Module FTOS Command Line Referen - Page 274

www.dell.com | support.dell.com Table 14-8. Diagnostic Data in show interfaces transceiver (continued) Line Description Tx Power High Warning Flag Rx Power High Warning Flag Temperature Low Warning Flag Voltage Low Warning Flag Tx Bias Low Warning Flag Tx Power Low Warning Flag Rx Power Low Warning Flag This can be either true or false, depending on the Current Tx power value displayed above. This can be either true or false, depending on the Current Tx power value displayed above. This can be either true or false, depending on the Current Temperature value displayed above. This can be either true or false, depending on the Current voltage value displayed above. This can be either true or false, depending on the present Tx bias current value displayed above. This can be either true or false, depending on the Current Tx power value displayed above. This can be either true or false, depending on the Current Rx power value displayed above. Related Commands interface show ip interface show interfaces show inventory Configures a physical interface on the switch. Displays Layer 3 information about the interfaces. Displays information on a specific physical interface or virtual interface. Displays the switch type, FTOS version including hardware identification numbers and configured protocols. show range Display all interfaces configured using the interface range command. Syntax show range Command Mode INTERFACE RANGE (config-if-range) Command History Example Version 8.3.16.1 Introduced on MXL 10/40GbE Switch IO Module Figure 14-38. show range Command Example FTOS(conf-if-range-te-0/16)#show range interface tengigabitethernet 0/16 FTOS(conf-if-range-te-0/16)# Related Commands interface show ip interface show interfaces Configures a physical interface on the switch. Displays Layer 3 information about the interfaces. Displays information on a specific physical interface or virtual interface. 274 | Interfaces