Dell Force10 MXL Blade MXL 10/40GbE Switch IO Module FTOS Command Line Referen - Page 475

policy-map-output Create an output policy map. Syntax policy-map-output policy-map-name To remove a policy map, use the no policy-map-output policy-map-name command. Parameters policy-map-name Enter the name for the policy map in character format (16 characters maximum). Defaults none Command Modes CONFIGURATION Command History Usage Information Version 8.3.16.1 Introduced on MXL 10/40GbE Switch IO Module Output policy map is used to assign traffic to different flows using QoS policy. This command enables the policy-map-output configuration mode (conf-policy-map-out). Related Commands service-queue policy-aggregate service-policy output Assigns a class map and QoS policy to different queues. Allows an aggregate method of configuring per-port QoS via policy maps. Applies an output policy map to the selected interface. qos-policy-input Create a QoS input policy on the router. Syntax qos-policy-input qos-policy-name [layer2] To remove an existing input QoS policy from the router, use the no qos-policy-input qos-policy-name [layer2] command. Parameters qos-policy-name layer2 Enter your input QoS policy name in character format (32 character maximum). (OPTIONAL) Enter the keyword layer2 to specify a Layer 2 Class Map. Default: Layer 3 Defaults Layer 3 Command Modes CONFIGURATION Command History Usage Information Version 8.3.16.1 Introduced on MXL 10/40GbE Switch IO Module Use this command to specify the name of the input QoS policy. After input policy is specified, rate-police can be defined. This command enables the qos-policy-input configuration mode- (conf-qos-policy-in). Quality of Service (QoS) | 475