Dell Force10 MXL Blade MXL 10/40GbE Switch IO Module FTOS Command Line Referen - Page 264

www.dell.com | support.dell.com show interfaces dampening Display interface dampening information. Syntax show interfaces dampening [[interface] [summary] [detail]] Parameters interface summary detail (OPTIONAL) Enter one of the following keywords and slot/port or number information: • For a Port Channel interface, enter the keyword port-channel followed by a number: Range: 1-128 • For a 10-Gigabit Ethernet interface, enter the keyword TenGigabitEthernet followed by the slot/port information. • For a 40-Gigabit Ethernet interface, enter the keyword fortyGigE followed by the slot/port information. (OPTIONAL) Enter the keyword summary to display the current summary of dampening data, including the number of interfaces configured and the number of interfaces suppressed, if any. (OPTIONAL) Enter the keyword detail to display detailed interface dampening data. Defaults none Command Modes EXEC Command History Example Version 8.3.16.1 Introduced on MXL 10/40GbE Switch IO Module Figure 14-32. show interfaces dampening Command Example FTOS#show interfaces dampening Interface Supp Flaps State tengig 3/2 Up 0 tengig 3/10 Up 0 FTOS# Penalty 0 0 Half-Life 20 5 Reuse 800 750 Suppress 4500 2500 Max-Sup 120 20 Related Commands dampening show interfaces show interfaces configured Configures dampening on an interface Displays information on a specific physical interface or virtual interface. Displays any interface with a non-default configuration. 264 | Interfaces