Dell Force10 MXL Blade MXL 10/40GbE Switch IO Module FTOS Command Line Referen - Page 586

www.dell.com | support.dell.com Parameters local engineID remote ip-address udp-port port-number engineID Enter the keyword local followed by the engine ID number that identifies the copy of the SNMP on the local device. Format (as specified in RFC 3411): 12 octets. • The first 4 octets are set to the private enterprise number. • The remaining 8 octets are the MAC address of the chassis. Enter the keyword remote followed by the IP address that identifies the copy of the SNMP on the remote device. Enter the keyword udp-port followed by the UDP (User Datagram Protocol) port number on the remote device. Range: 0 to 65535 Default: 162 Defaults As above Command Modes CONFIGURATION Command History Version 8.3.16.1 Introduced on MXL 10/40GbE Switch IO Module Usage Information Changing the value of the SNMP Engine ID has important side effects. A user's password (entered on the command line) is converted to a message digest 5 algorithm (MD5) or secure hash algorithm (SHA) security digest. This digest is based on both the password and the local Engine ID. The command line password is then destroyed, as required by RFC 2274. Because of this deletion, if the local value of the Engine ID changes, the security digests of SNMPv3 users will be invalid, and the users will have to be reconfigured. For the remote Engine ID, the host IP and UDP port are the indexes to the command that are matched to either overwrite or remove the configuration. Related Commands show snmp engineID show running-config snmp Displays SNMP engine and all remote engines that are configured on the router. Displays the SNMP running configuration. snmp-server group Configure a new SNMP group or a table that maps SNMP users to SNMP views. Syntax snmp-server group [group_name {1 | 2c | 3 {auth | noauth | priv}}] [read name] [write name] [notify name] [access-list-name | access-list-name]] To remove a specified group, use the no snmp-server group [group_name {v1 | v2c | v3 {auth | noauth | priv}}] [read name] [write name] [notify name] [access-list-name | access-list-name]] command. 586 | Simple Network Management Protocol (SNMP) and Syslog