Dell Force10 MXL Blade MXL 10/40GbE Switch IO Module FTOS Command Line Referen - Page 679
buffer-profile, global, port-set, Defaults, Command Mode, Usage, Information, Command, History
View all Dell Force10 MXL Blade manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 679 highlights
port-set port-pipe buffer-policy buffer-profile Enter the keyword port-set followed by the port-pipe number. Range: 0-1 Enter the keyword buffer-policy followed by the name of a buffer profile you created. Defaults none Command Mode BUFFER PROFILE Usage If you attempt to apply a buffer profile to a non-existent port-pipe, FTOS displays the following Information message. However, the configuration still appears in the running-config. %DIFFSERV-2-DSA_BUFF_CARVING_INVALID_PORT_SET: Invalid FP port-set 2 for stack-unit 2. Valid range of port-set is When you remove a buffer-profile using the no buffer-profile [fp | csf] command from CONFIGURATION mode, the buffer-profile name still appears in the output of show buffer-profile [detail | summary]. After a line card reset, the buffer profile correctly returns to the default values, but the profile name remains. Remove it from the show buffer-profile [detail | summary] command output by entering no buffer [fp-uplink | csf] buffer-policy from CONFIGURATION mode and no buffer-policy from INTERFACE mode. Command History Related Commands H Version 8.3.16.1 Introduced on MXL 10/40GbE Switch IO Module buffer-profile (Configuration) Creates a buffer profile that can be applied to an interface. buffer-profile (Configuration) Create a buffer profile that can be applied to an interface. Syntax Parameters buffer-profile {{fp | csf} profile-name | global {1Q|4Q} fp csf profile-name global 1Q 4Q Enter this keyword to create a buffer profile for the Field Processor. Enter this keyword to create a buffer profile for the Switch Fabric Processor. Create a name for the buffer profile. Apply one of two pre-defined buffer profiles to all of the port-pipes in the system. Enter this keyword to choose a pre-defined buffer profile for single queue (i.e non-QoS) applications. Enter this keyword to choose a pre-defined buffer profile for four queue (i.e QoS) applications. Defaults Command Mode Command History global 4Q CONFIGURATION H Version 8.3.16.1 Introduced on MXL 10/40GbE Switch IO Module Debugging and Diagnostics | 679