Dell Force10 MXL Blade MXL 10/40GbE Switch IO Module FTOS Command Line Referen - Page 348
default vlan-id, default-vlan disable
View all Dell Force10 MXL Blade manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 348 highlights
www.dell.com | support.dell.com default vlan-id Specify a VLAN as the Default VLAN. Syntax default vlan-id vlan-id To remove the default VLAN status from a VLAN and VLAN 1 does not exist, use the no default vlan-id vlan-id command. Parameters vlan-id Enter the VLAN ID number of the VLAN to become the new Default VLAN. Range: 1 to 4094. Default: 1 Defaults The Default VLAN is VLAN 1. Command Modes CONFIGURATION Command History Version 8.3.16.1 Introduced on MXL 10/40GbE Switch IO Module Usage Information To return VLAN 1 as the Default VLAN, use this command syntax (default-vlan-id 1). The default VLAN contains only untagged interfaces. Related Commands interface vlan Configures a VLAN. default-vlan disable Disable the default VLAN so that all switchports are placed in the Null VLAN until they are explicitly configured as a member of another VLAN. Defaults The default VLAN is enabled. Command Modes CONFIGURATION Command History Version 8.3.16.1 Introduced on MXL 10/40GbE Switch IO Module Usage The no default vlan disable command is not listed in the running-configuration, but when you disable Information the default VLAN, default-vlan disable is listed in the running-configuration. name Assign a name to the VLAN. Syntax name vlan-name To remove the name from the VLAN, use the no name command. Parameters vlan-name Enter up to 32 characters as the name of the VLAN. 348 | Layer 2