Dell Force10 MXL Blade MXL 10/40GbE Switch IO Module FTOS Command Line Referen - Page 315

show ip route View information, including how they were learned, about the IP routes on the switch. Syntax show ip route [hostname | ip-address [mask] [longer-prefixes] | list prefix-list [process-id] | all | connected | static | summary] Parameter ip-address mask longer-prefixes list prefix-list process-id connected all static summary (OPTIONAL) Specify a name of a device or the IP address of the device to view more detailed information about the route. (OPTIONAL) Specify the network mask of the route. Use this parameter with the IP address parameter. (OPTIONAL) Enter the keyword longer-prefixes to view all routes with a common prefix. (OPTIONAL) Enter the keyword list and the name of a configured prefix list. See show ip route list. (OPTIONAL) Specify that only OSPF routes with a certain process ID must be displayed. (OPTIONAL) Enter the keyword connected to view only the directly connected routes. (OPTIONAL) Enter the keyword all to view both active and non-active routes. (OPTIONAL) Enter the keyword static to view only routes configured by the ip route command. (OPTIONAL) Enter the keyword summary. See show ip route summary. Command Modes EXEC EXEC Privilege Command History Example Version 8.3.16.1 Introduced on MXL 10/40GbE Switch IO Module Figure 15-17. show ip route all Command Example FTOS#show ip route all Codes: C - connected, S - static, R - RIP, B - BGP, IN - internal BGP, EX - external BGP,LO - Locally Originated, O - OSPF, IA - OSPF inter area, N1 - OSPF NSSA external type 1, N2 - OSPF NSSA external type 2, E1 - OSPF external type 1, E2 - OSPF external type 2, i - IS-IS, L1 - IS-IS level-1, L2 - IS-IS level-2, IA - IS-IS inter area, * - candidate default, > - non-active route, + - summary route Gateway of last resort is not set Destination ----------FTOS# Gateway ------- Dist/Metric Last Change IPv4 Routing | 315