Dell Force10 MXL Blade MXL 10/40GbE Switch IO Module FTOS Command Line Referen - Page 140

www.dell.com | support.dell.com set tag Configure a filter to specify a tag for redistributed routes. Syntax set tag tag-value Parameters tag-value Enter a number as the tag. Range: zero (0) to 4294967295. Defaults Not configured Command Modes ROUTE-MAP Command History Version 8.3.16.1 Introduced on MXL 10/40GbE Switch IO Module Related Commands set automatic-tag set metric set metric-type Computes the tag value of the route. Specifies the metric value assigned to redistributed routes. Specifies the route type assigned to redistributed routes. show config Display the current route map configuration. Syntax show config Command Modes ROUTE-MAP Command History Example Version 8.3.16.1 Introduced on MXL 10/40GbE Switch IO Module Figure 6-13. show config Command Example FTOS(conf-route-map)#show config ! route-map hopper permit 10 FTOS(conf-route-map)# show route-map Display the current route map configurations. Syntax show route-map [map-name] Parameters map-name (OPTIONAL) Enter the name of a configured route map, up to 140 characters. Command Modes EXEC EXEC Privilege Command History Version 8.3.16.1 Introduced on MXL 10/40GbE Switch IO Module 140 | Access Control Lists (ACL)